XAircraft X650 QuadCopter

XAircraft X650 is a remote control four rotor mini helicopter designed for the model aircraft enthusiasts which powered by lithium battery. It flies stably by four well controlled individual propellers(12-inch 60-pitch) direct-driven from four brushless motors. Fly forward, backward, left, right, up, down… by radio control equipment. Compared with traditional helicopters, the X650 quadcopter/quadrotor is a ideal platform for first person flight(FPV) to bringing you a brand-new flying experience.

Support 13 sensors as flight attitude, height, direction, position (XAircraft GPS Module-Require additional purchase), temperature, and power consumption. With the help of XAircraft flight control algorithms, the X650 is easier to fly than other types of helicopters, and has quite good stability.

Frame
X650 quadcopter/quadrotor mainly use aluminum alloy and glass fiber materials make sure the mechanical structure is durable and shatter-resistant.

Anti-Vibration Camera Mount
Made of glass fiber. Damping design plus flight control algorithms ensures the high quality of the photos and videos taken in flight period. The damping design filter the high-frequency vibration, and the flight control algorithms control the steering gear to filter the low frequency jitters and make the equipment balance automatically.

Optional for uniaxial steering engine or biaxial.

Propeller & BrushLess Motor
Exclusive efficient propellers, good quality in folding endurance and breaking-proof. It will not easy to crack at low temperature. The temperature ranges from -10℃  to 50℃(14℉-122℉). Propellers driven by brushless motors deirectly offer efficiency of up to 9g/W under rated load, each group of propeller and motor can provide thrust as much as 700g, which ensures the sate flight with 1600g take-off weight at most.

Flight controller:
Provide 12-channel control signals input, X650 quadcopter/quadrotor need 4 channels for basic flying at least, if you want to adjust the shutter and the camera angle, you need two additional channels, the remaining channels for extension using, such as GPS fixed-point, fixed height, fixed direction.

X650 Flight Control Unit:

• 3-axis gyroscope

• 3-axis acceleration sensor

• Optional 3-axis magnetic field sensor

• Output: Euler angles (Pitch, Roll, Yaw) (units deg), 3-axis angular velocity (in deg/s), 3-axis acceleration (in g)

X650 Input, Output and Control Unit

• 12-channel remote control input

• 12-channel control signal output, ALL channel support UltraPWM ESC, General Electric Adjustment, high-speed digital servo, general servo.

• 2 built-in modules: input control signal module and output module

• 5 expansion module interface for connecting AHRS, GPS, RF modules.

• 1 Link interface for connecting USB-Link or wireless module.

X650 ESC-A4 High-Speed (UltraPWM) Electric  Speed Control Device

• 4 Electric speed control device designed into one, line connect easy and safe.

• Up to 60 MOS, able to withstand the high current.

• Continue to provide 35A output current in the 3s battery.

• 5A output capacity integrated(UBEC).

• Support UltraPWM protocols and the control frequency up to 500Hz (2ms).

X650 new software interface for flight control management.

Features:

• Embedded AVR and 51 chips, MCU structure, balance control guarantee.

• Three highly reliable axis gyroscopes and accelerometer.

• USB interface for communication between PC and X650.

• Compatible normal aircraft remote control as Futaba FF9, JR9X2 and new 2.4G radio etc.

• Weight:900g(Excluding receiver and battery)

• Payload Capabiltiy:700g

• Maximum Gross Take-Off Weight;1600g

• Airborne Period;>12min(with 3S 33oomAh battery, payload under 1500g)

• Battery:3S 2200mAh ~ 5500mAh/4S 1800mAh ~ 5500mAh Lithium Polymer

• Battery Continuous Discharge:15C

• Battery Connector: T type connector

• The X650 PC software only supports on windows XP OX or above, such as Windows 7.

Note: The transmitter,receiver and battery are NOT INCLUDED, you need to prepare a 6-chn(at least) transmitter, a 6-chn(at least) receiver, 3S 2200mAh~5500mAh or 4S 2200mAh~5500mAh lithium battery(instant discharge capacity>15C) and assemble X650 youself.

Glass Fiber Version:In stock

1 x X650 Fuselage Frame(Glass Fiber and CNC Aluminum Alloy, 950g)
1 x X650 Body Cover
1 x X650 Landing Gear(Glass Fiber and CNC Aluminum Alloy)
4 x Outer Rotor Brushless Electric Motor
2 x 12-inch high-strength propeller (positive)
2 x 12-inch high-strength propeller (anti)
1 x XAircraft FC1212-S Flight Controller
1 x XAircraft AHRS-S Attitude Sensor
1 x X650 ESC-A4 High-Speed (UltraPWM) Electric Speed Control Device
1 x XAircraft USB-Link PC Connector x1
1 x Flight Control Management(Parameter Adjustment) Software
One year free updates of flight control management software and firmware
8 hours X 5days Email technical support
Three-month free warranty for circuit components(No include ESC-A4)

Carbon Fiber Version:In stock

1 x X650 Fuselage Frame(Carbon Fiber and CNC Aluminum Alloy, 850g)
1 x X650 Body Cover
1 x X650 Landing Gear(Carbon Fiber and CNC Aluminum Alloy)
4 x Outer Rotor Brushless Electric Motor
2 x 12-inch high-strength propeller (positive)
2 x 12-inch high-strength propeller (anti)
1 x XAircraft FC1212-S Flight Controller
1 x XAircraft AHRS-S Attitude Sensor
1 x X650 ESC-A4 High-Speed (UltraPWM) Electric Speed Control Device
1 x XAircraft USB-Link PC Connector x1
1 x Flight Control Management(Parameter Adjustment) Software
One year free updates of flight control management software and firmware
8 hours X 5days Email technical support
Three-month free warranty for circuit components(No include ESC-A4)

Extension Accessory

Uniaxial Camera Mount: In stock
4 x High-frequency cushion blocking(load < 180g)
1 x Camera shutter(Glass Fiber and CNC Aluminum Alloy)
1 x Tilt head Camera Mount(Glass Fiber and CNC Aluminum Alloy)
Note: No include the steering engine (compatible most of 9-12g digital or analog steering engine)

Biaxial Camera Mount:Pre-sale
4 x High-frequency cushion blocking(load < 180g)
4 x High-frequency cushion blocking(load < 220g)
1 x Camera shutter(Carbon Fiber and CNC Aluminum Alloy)
1 x Tilt head & rotate Camera Mount(Carbon Fiber and CNC Aluminum Alloy)
2 x High-speed medium-sized Digital steering engine(Metal Gear)
1 x High-speed micro-shutter steering engine

GPS Module:Pre-sale
1 x GPS Module: Contains a barometer (altimeter), X650 can locate at settled high, fixed or GoHome (required use with electronic compass).
1 x GPS Antenna

Electronic compass:Pre-sale

1 x 3-axis electronic compass: Work with GPS Module

Buy X650 quadcopter parts from here